Sony » VGN-CR (Silver) » VGNCR290

Sony » VGN-CR (Silver) » VGNCR290 LCD Screen Replacement Guide

How to Remove Replace Install your Sony VGN-CR (Silver) VGNCR290 Laptop LCD Screen

1. Remove the rubber covers from you Sony VGNCR290 LCD Screen.

2. Use a philips head screw driver to remove the screws.

3. Pry off the Sony VGNCR290 Plastic LCD bezel.

4. Remove the screws from the side of the LCD hinges.

5. Handle the Sony VGNCR290 LCD hinges with care as they are delicate.

6. Place the Sony VGNCR290 LCD Screen down on its front and remove the LCD ribbon cable from the LCD.

7. Unplug and remove the Sony VGNCR290 Inverter from the LCD.

8. You are now ready to replace and install your new Sony VGNCR290 LCD Screen.

9. Recconnect back your Sony VGNCR290 Inverter LCD Cable and Hinges.

10. Place the screws back in and secure the Plastic LCD Bezel back in place.